Choosing uPVC Replacement Window Handles

The majority of customers agree that Upvc replacement handles are simple to install and feel good. However, it's important to know that the type of handle you pick should be appropriate for your window.

The primary factor is the step height which refers to the space between the nose of the handle to the frame or base. Other considerations include locking mechanisms and styles.

Replacement parts

There is a broad selection of replacement upvc window handles available to buy. They come in a variety of styles and colors, so there's bound to be something that will fit your windows. It's easy to make an impulse purchase especially when the handle breaks. Therefore, it is best to check a few things before buying the replacement. The first thing to think about is what kind of upvc handle do you currently have and what the difference between the types is. The table below outlines the most commonly used handles to help you identify the one that will fit your upvc windows.

Most double-glazed windows today come with epag handles. They are usually attached to the frame using two screws that screw in from both above and below.

The spindle bar in the back may be of different in size, and will determine if they're left-handed or right-handed. It is essential to know the measurements of the handle you have to ensure that you get the appropriate replacement.

Usually fixed with two bolts, similar to the Espag handle but they have a lower projection from the frame which means that the handle will not penetrate your blinds. This is an ideal choice for blinds on your windows made of upvc and want to ensure that the handle will blend in with them.

Cockspur handles are similar to Espag handles, however they have a nose that closes over a wedge that rests on the frame of the window. This kind of handle can be often found on older upvc windows as well as on some wooden windows.

On casement windows, tilt and turn handles can be operated by either turning the handle or pressing on the top of window. This lets you open the window from inside and clean it from outside without having to climb a ladder or step across the fence. They are also a great alternative for those with limited mobility. They can be an excellent way to increase security and accessibility within the home.

Tips and hints

Many people will have to replace their uPVC window handles at some time. When this happens it's a good idea to be aware of a few tricks and tricks that will make the process be as smooth as it can.

Check what type of handle is located at your residence. Based on the type of handle and locking mechanism, it may be necessary to replace the handle and lock. If the roller cams or shoot bolts (espags) are jammed, or seizing up, you'll have to replace them along with the handle.

Thankfully, the majority of uPVC handles are similar and follow industry standard sizing, which makes replacing them a fairly easy process. The first step is to remove the screws from the handles, which are typically using pozi-drive screws. Once they are removed, you can take the handle apart.

If you've got the handle split, it's an ideal idea to take a note of how much of the spindle extends from the base of the handle. This will allow you to determine the length of the spindle for a replacement handle. To do this, simply measure the amount of the square peg sticking out from the top of the handle, and use it as a reference.

This is particularly important for inline uPVC windows handles, as they are always straight and only open left or right. They aren't able to function in the middle. If you're not sure of the kind of handle you have in your home, it can be a good idea to take an existing handle from your neighbour's house and see how it operates to get an idea.

Another excellent way to figure out what handed the uPVC window handle is is to look at how the handle turns when operating. Handles that are hand-operated will turn clockwise or counter-clockwise. If you're not sure then ask someone to open the window using the handle and see how it works.

Find the spindle's measurement.

The selection of the right replacement handle for your windows can be a bit difficult since different handles are not the same size. The spindle is the part that controls the locking mechanism inside the window. It is essential that when fitting the new handle that you measure the length of the spindle accurately to ensure that it will fit. There are a variety of types of uPVC window handles and they operate in different ways, so it is vital that you know what type of handle you have and the type of locking system you have.

The spindle on the espag handle extends from the handle's rear, and is connected to the lock gearbox in the window frame. When you turn the handle this turns the lock inside the gearbox and opens the window. They are installed on uPVC windows with casement. They can be locked using keys for extra security.

Cockspur handles are equipped with a "nose" that is closed over an elongated striker block that is placed on the frame and they are typically found on older double-glazed uPVC windows. They are also simple and can be locked with keys. It can be more difficult to replace these handles because they are not as popular as the handles made of espagnolette.

If you have a tilt and turn uPVC and you need a replacement handle with an alternative locking system. This will be able to open the window, but also turn it back and forth to fully open it. You must choose an opening handle that has a spindle that is at least 55mm in order to be able to reach the window glass replacements frame.

You can follow the same method to remove and replace this type of uPVC handle, but you must be cautious when removing the old one. It is possible to open the window a bit larger than normal to ensure you get to both screws fixing it to the frame. After you have installed your new uPVC handles and verified that they are in the correct position and tighten the screws and test to ensure the lock is working properly.

Fit the new handle

Once you have the right replacement handle, it should simply screw into the appropriate position. This will require a screwdriver, but may be easier with an electric one. It is important to not overtighten the screws when screwing them in. This could cause the handle or knob to become warped.

The second step in fitting the new handle is to put in the spindle. It is the part that is inserted into the handle and operates the locking mechanism inside the window. It is essential that it is installed correctly since this will ensure the window is able to be shut and opened securely.

There are a myriad of different kinds of uPVC handles. There are various kinds of uPVC window handles.

Espagnolette Handles are inline handles that can be used to open tilt windows and turn them.

Cranked Espagnolette Handles: These are similar to inline handles, but have a curvaceous shape that can be useful for hard-to-reach windows.

Tilt and turn handles - They are used to operate the opening and closing mechanisms when tilting and turn windows. They also allow for the movement of windows.

The majority of uPVC window frames are equipped with these. They are often referred to as 'Bay Windows in the UK.

It can be very frustrating if your uPVC handle breaks. There is no need to replace the entire uPVC window due to a broken window handle. There are a few easy steps you can follow to repair or replace a broken uPVC handle.

You can repair your broken Window replacement window handle fast by identifying the model and measuring the spindle. When working with windows and tools it is crucial to put safety first. However it is a simple job. It can be the difference between a safe and secure home, or an insecure open window! If you have any questions or would like to speak with a professional regarding replacing your window handle, call Bridgewater Glass. Our team is experienced and knowledgeable to help you with any issues.