Defra Approved Back Boiler Stoves

When selecting the best stove for your home, there are many things to consider. From the alluring appeal of dual-functionality to the practical aspects of installation, compliance and safety.

Back boiler stoves approved by DEFRA are a great solution to these problems. This is due to the fact that they use the smallest amount of combustion air, resulting in the smoke is very low.

Clean Burn Technology

A defra-approved back boiler stove is a great choice for those who want a clean burning stove that can provide heat to your home and provide hot water to radiators. These stoves have an integrated steel boiler capable of heating the central heating system while the fire is burning inside the stove. This makes it an efficient way to use wood burners.

The majority of our defra-approved back boiler stoves have an airwash system that is pre heated that assists in keeping the glass doors clear of ash and soot deposits. The secondary combustion system re-burns any unburnt particles created during the initial combustion. This keeps the flue gas free of contaminants, which results in an efficient burn and lower fuel costs, which can save you money on your energy bills.

Certain of our stoves have been independently tested and deemed Defra SE (Smoke Exempt). They achieve this by having an adjustment on the top air vent to prevent the vent from closing all the way which would cut off the oxygen supply to the fire - this can cause it to smolder rather than burn cleanly resulting in more pollutants being released into the atmosphere.

The moisture content of the fuel could be a major element in the amount of smoke that is emitted from a stove. We suggest that you burn seasoned, dry wood with a moisture content of less than 20% to ensure that your stove is burning as efficiently and effectively as you can. The majority of our approved Defra stoves have a built-in moisture sensor, which can be adjusted to adjust the burning rate when burning wet wood.

Some manufacturers have even gone a step further to enhance the efficiency of their stoves by incorporating an advanced clean burn system, which is controlled by a chrome pull lever on the base of the stove that opens and closes the vent which draws air into the fire and reburns the initial smoke produced during the initial combustion process. This makes our Defra SE approved stoves even more efficient, so you could save even more money on your energy bills.

Easy to Clean

A defra approved back boiler stove allows you to run your central heating as well as hot water from the same system. This can be accomplished by connecting a loop from the other taps on the back boiler (there are usually 2) to your hot water tank then using thermosyphoning to bring the heat into your home. This will also ensure that your boiler will never run out of hot water since it is supplied by the tank.

To ensure that your stove is operating at its optimum level of performance you need to clean it frequently. First, ensure that the stove is ice cold. Then wipe down the body and door of the stove using a clean cloth. We recommend using a microfiber cloth, as these are far less harsh than cotton ones.

After wiping down the stove's interior, it is recommended to wash the glass. Glass cleaners are readily available in a variety of hardware stores and can help remove stubborn stains and marks. It is recommended to apply the glass cleaner only sparingly, as too much can damage the surface of the glass.

Over time the seals around your stove's glass and doors can start to wear down. It is essential to replace the seals each year to prevent gaps that allow heat to escape. Depending on the model that you pick it is possible to do this easily using stove rope that is available from most hardware stores.

If you have a defra-approved stove with an Eco Design 2022 compliant back boiler that means the combustion process is much more efficient than traditional wood burning stoves. Modern technology has made it possible to reduce the amount of combustibles released into air. This has made stoves that are compliant more eco-friendly and are also cheaper to run.

A back boiler stove will always be more expensive than a regular multifuel stove because it produces more hot water. It is still an economical way to heat your home and can be used for both central heating and hot-water.

Easy to Install

Boiler stoves can be used to provide heat for the room and hot water to your central heating system, which makes them a stylish work horse that could be an efficient and economical option. In contrast to other multi-fuel stoves which require the connection of an existing gas boiler a wood burner with back boiler is able to connect directly to your main hot water and central heating supply and eliminate the need for a second heating system.

A wood burning stove with back boiler could be used to provide power to your heating system completely by renewable sources making them an green option over other stoves. They also produce less emissions due to the fact that they burn wood or pellets, rather than oil or gas heating systems which makes them a good option for those concerned about global warming.

Many people are confused about how a wood burning stove with a back boiler works installation of one is relatively simple. It is crucial to ensure that the stove is properly installed and connected to your heating system. This should be done by a qualified heating technician. They can verify that the stove is installed correctly and connected to correct systems. They can also ensure that all safety devices are in place.

Defra Approved stoves or affordable DEFRA stoves (try this website) Exempt Stoves as they are often referred to, have passed the Department of Environment, Food and Rural Affairs (DEFRA stoves installation) requirements for smoke emission levels. They are allowed to be used in Smoke Control Areas and have been tested and modified to ensure that they provide a clean burning that is able to be used with both wood and smokeless fuels.

As such, DEFRA approved stoves, such as the Defra Exempt Dunsley Yorkshire and our top-selling Hi-Flame Aidan are able to offer an extremely efficient combustion process with very low harmful emissions. They have been tested to the latest Eco Design regulations which limit the amount of particulate matter as well as NOx, CO2 and organic gases a stove can produce during its normal operation.

Smoke Control Areas Suitable

Most UK cities and towns are classified as Smoke Control Areas and burning logs on older stoves or open fires could be a cause for a fine if they are emitting smoke that is considered to be nuisance. The good news is that Defra approved back boiler stoves are not subject to these restrictions if you select the correct appliance for your home.

The Defra exempt wood burners are made to utilize Clean Burn technology which ensures that the fuel used is efficiently burned with little smoke production. This means that you can have a beautiful fireplace even when you live in a smoke-free area, but you will need limit the use of logs to authorised smokeless mineral fuels.

To comply with Defra requirements These stoves have airtight chambers for precisely controlled airflow. They usually use triple airflow systems to ensure that combustion byproducts are burned up before they are able to escape the chimney. This not only helps to prevent any nuisance smoke but also reduces the accumulation of soot, which can hinder the flue's flow and reduce gas efficiency.

It is essential that you purchase your Defra approved stove from an Expert Local Retailer who can make sure that the correct size of stove is chosen for your space to provide the highest efficiency in heating and that it is installed correctly by a HETAS registered installer. They can also assist you in choosing the most suitable chimney liner to ensure a secure and efficient installation, and help you decide if your home requires additional ventilation.

Modern DEFRA approved stoves are far superior to traditional open fires or wood burners. They have a minimum of 75% efficiency, which will not only lower your environmental impact but also saves you money. In addition to this Defra approved stoves are capable of being used in a smoke controlled area and they will require a minimum of 6mm stainless steel twin wall flexible chimney liner that is less expensive than the more expensive 12mm liners needed for Ecodesign stoves.

If you are unsure regarding whether your property is within a smoke-control area, you can ask your local council. They will be able provide you with the most current information. Most reputable stove manufacturers have a dedicated Defra exempt category of their range, so that you can easily recognize these appliances when you shop.