How to Replace the Replacement Key Battery For the Saab 9-3

Saab owners have to follow a series of unique steps to add a second ignition key. This requires the use of a handheld computer called Tech-2 which is to be used by the dealer. Then the transponder is replaced and a key have to be purchased.

Rotate your keys to prevent one from wearing out more than the other. This will help to keep your keys in top condition.

replacement saab 9-3 key Case

Contrary to the classic Saab keys of the past keys, the modern key fobs are equipped with electronics which makes it more difficult to create a duplicate. This has made stealing cars considerably more complicated than it was 20 years ago. It has also made it more expensive to replace lost keys.

Every owner of a 9-3 Saab should have at least two working keys. It costs a fortune to replace a lost or damaged key since it requires replacing the CIM module, as well as changing the locking cylinders. Dealers usually charge between $100 and $200 for this.

There are a few ways to avoid these expensive. Some parts providers will look up the code from a spare key (usually the same one that opens the doors and turns off the ignition) and cut a new metal key blade at less than the dealer's cost. The key must, however, be the same as the original in order to function in your car.

You can also change the case yourself by following these steps. You'll require a flathead screwdriver and some patience. Using the screwdriver, slowly pry the plastic apart and separate the emergency keys from the case. When the case is opened, remove all electronics and put them in the new case. Make sure you put the correct key and badge back in the case too.

Replacement Battery

The replacement battery for the Saab 9-3 is a low-cost part that can be replaced quickly and easily. This YouTube video by Cyclone Cyd shows How To Open A Saab 93 Without A Key (Https://Telegra.Ph/10-Quick-Tips-About-Replacement-Saab-Key-07-11-2) to replace the remote fob battery in only four steps. This tutorial should work with any modern Saab key fob. However, the procedure could differ slightly.

The first step is to locate the button that will release the backup key in the fob. It is usually located just below the Saab logo on the back of the fob. Then use a flathead screwdriver to insert into the small hole in this button. This should be enough to unlock the fob's case so that you can replace the battery.

After you have installed the battery CR1632, you are able to reassemble the remote key fob. You can then program it into your car. The whole process should not take more than an hour. It is a very simple procedure that doesn't require any special tools.

If you lose a key the procedure will be more complicated, but it can still be accomplished. The dealer will first need to read the VIN of the vehicle and order an alternative TWICE module, as well as a key blade that has the correct unique code. After that, they will need to cut the replacement key for saab 93 key and then program it with the latest software tool known as MDI.

Key Replacement Fob

The key fob is the device that locks and unlocks your car, it has a battery inside. Batteries are able to last for a short time and eventually will die. It is a common problem with all cars. The good news is you can replace the battery in most key fobs without having to replace the entire case. You can buy replacement saab car keys fobs from Amazon that come with all the electronics already installed, which means you can just pop open the case and replace the batteries that were in the case. You'll need to remove the emergency key before you replace the batteries. To do this, you need to insert an small screwdriver with a flat head into the slot in the middle of the. The case will split when you move the screwdriver around it.

If you're planning to replace your keys, make sure you have a spare on hand. This will save you a lot of money. If you have a spare you can ask the dealer cut an additional key and program it to the car, which is much cheaper than replacing the entire key fob.

If you don't have a spare, it is possible to add an additional key to your car, but this requires a lot research and effort. It costs around a hundred dollars to get an additional car key. The computer of the car must also be programmed. This can be done by a professional, but it's an expensive option for the majority of owners.

Replacement Ignition

The current SAAB 9-3 uses an advanced alarm system based on a key code. If you lose only one key, it may be expensive to add another one since the car must have a special computer added and be programmed to accept a new key. Most locksmiths can't do this and even dealers can charge several hundreds of dollars just to program the new key!

Dealers will charge you the highest price to replace your car computer (also called the CIM or saab 900 key twice) in the event that you lose your only working key. Instead we can reprogramme the EEPROM in your current car computer to make it ready for an additional key, which will save you more than 50% of what you'll spend at a dealer.

If you've owned a SAAB 9-3 a long time, you know that the ignition keys are not very durable. They can become extremely sticky and the buttons can be ripped off at times which is why you should think about purchasing a new one if yours isn't functioning properly. It's not as difficult as it appears to replace the ignition key. With the right tools, it is able to be accomplished in a short time.