Repairs to uPVC Windows

uPVC windows are a great choice for modern homes. They are easy to maintain, durable and long-lasting. As opposed to aluminium and timber they don't corrosion or rot.

Regularly cleaning and lubricating UPVC windows and doors is vital. This will help avoid unnecessary repair costs and improve energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause serious damage to your home and may even be fatal. It is essential to make sure that your windows are in good shape.

Single-pane windows are relatively simple to replace and will usually fit into the frames of the past easily. However If you have double pane windows that are anchored by internal beading, it'll be more difficult to remove the old panes and put in new ones. In this instance you'll need to source some plastic spacers to help the new pane to fit correctly into the window frame.

Wearing eye protection and thick gloves is essential for anyone who plans to remove the glass yourself. You should also lay down a drop cloth before you begin working on the window panes, so that any shards fall on the fabric and not onto the floor, where they could be trampled under.

It's a great idea to seal the gap after the glass is removed. This will prevent drafts and water from getting into your home until a professional arrives to repair the window. This will also act as a barrier, deterring any intruders from getting access into your home. If the gap is large, you may think about a security door that has an integrated window, as it offers the best of both worlds.

2. Sagging

Upvc is a long-lasting and energy efficient alternative to timber sash window. However, over time, they are susceptible to a range of problems including sagging. A sagging window can cause problems with light, draughts or even security. It is crucial to act immediately if you realize that your uPVC windows are sliding.

To fix a sagging window you can try repositioning the hinges. First, you'll need to unblock the windows to reach the frame. With the screwdriver, you'll be able to remove the hinges on the top and bottom and adjust them by turning them clockwise or counter-clockwise. Close your window repair near me to test the fit after you have moved your hinges. If you're satisfied with the fit, you can tighten the screws to ensure they stay in the right place.

If you can't reposition the hinges, you may require replacing the seal. Seals made of rubber can dry out and lose their elasticity over time, causing them to loose their elasticity. It is essential to replace your seal as quickly as you can in order to keep your uPVC window waterproof and draughtproof.

uPVC handles may also loosen up. Most often, this is caused by screws that have come loose over time. However, it could also happen because the handle mechanism has been worn out. It's relatively easy to fix a loose uPVC handle. The first step is to close your window and do a test to ensure that it fits. The joint at the corner of the sash should align with the joint on the casing. If it doesn't, you can make use of a screwdriver to loosen the handle, and then reverse the mechanism back into its original position.

3. Water Leaks

It is crucial to take action if you awake each day to discover mouldy walls and floors that are wet. Windows that leak water do not only lead to the degradation of your home's structure but also undermine your efforts to control the temperature inside your home. Most of the time, uPVC window leaks are caused by damaged or missing sealant.

This is an easy fix that can be completed by any DIYer who has the ability. Depending on the severity of the issue is, the old caulking might need to be removed. It is crucial to keep in mind that when it is about uPVC window repairs, you should not be tempted to 'over-caulk and then make the area harder to clean and can reduce your energy efficiency.

Make sure that the drainage holes do not have debris in them, and also ensure that the sill pan is angled correctly to drain away from the window. In more extreme cases, you may need to replace the window.

Mold spots and rotten sills are other signs of water leakage. This is a fungus that thrives in damp conditions and is able to quickly spread throughout the house.

It is also important to keep in mind that if the leakage originates from the glass of your double glazed windows, it's more likely to be a problem with the glass seal rather than the frame or sagging. Again this can easily be fixed by an uPVC window specialist who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges may be to blame if your uPVC window is difficult to open, or if it opens with a breeze. Anyone who is a skilled DIYer can fix hinges in just a few minutes.

Like all mechanical parts, hinges can be damaged over time. The process of replacing a hinge on a window is an easy process but it can be easier if you have someone to help you hold the frame in place.

Verify that the uPVC hinges are open and closed in the correct direction. Check for the arrows on each hinge to determine which way the window should be opened.

Faulty window hinges could be caused by improperly opening the window in a certain manner or because of inadequate installation at the factory. Sending us a photo via our website will often resolve the problem. We are more than happy to provide assistance.

It is also important to ensure that the hinges are lubricated regularly. Applying an engineering lubricant that is light to the hinges is a good method to accomplish this. We suggest using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It also decreases the risk of a window getting stuck and stop corrosion. Ideally, you should perform this every year. WD40 and other solvent-based lubricants are not recommended as they could damage parts of your uPVC window.

5. Draughts

Draughts can be caused by a variety of different things. The hinges can also be disaligned as a result of wear, which can cause an opening between the frame and sash. If they're beyond repair, it could be necessary to have them realigned. The second is the interlock, which is on the hinge side of the window, may also become misaligned, again it's possible to give them a thorough clean, however in some cases it might be necessary to have them replaced.

The next most common reason for draughts are the window seals, these are prone to wear or damaged over time, and will allow air to escape through the gaps. Installing high-quality weatherstripping will help to stop draughts. Replace the upvc windows with low-emissivity lenses. This will help control indoor temperatures and decrease draughts.

The last way to reduce the amount of draughts is to use a Draught-exclusion device. These are usually fabric tubes filled with a filler, which can be put on top of your window sill. These will keep your home warm by blocking out cold air.

The windows made of upvc can keep providing excellent insulation and security to your home by performing regular maintenance and repairs. However, it is important to realize that windows last for a certain period of time and there may come an point at which it is more economical to replace them than repair them. If you are experiencing issues with your window made of upvc it is recommended to speak with an expert as soon as possible.