UPVC Window Repairs

upvc window repair windows are energy efficient and can help reduce heating costs. However, as they get older, problems can arise which need repair. This could include damaged hinges, handles or locks.

DIY enthusiasts can repair wooden windows fairly easily. It's less expensive than buying a new window.

Cracks

Cracks and breaks in windows made of uPVC can be a serious problem. Windows that are not repaired can lead to water intrusion, less effective barriers to cold weather, and even structural damage. It is important to find a local repair or builder who specializes in fixing uPVC frames and has the experience, skills and tools required to deliver the most effective results. This will ensure that the crack is repaired before it worsens and you don't need to replace your window glass or unit.

Small cracks in glass can be fixed by using a variety of DIY solutions. Masking tape and super glue are among the most common products that can keep cracked glass in place for a while. For more severe cracks, the tape may need to extend beyond the crack on both sides to get the optimal results.

You can also use two-part epoxy to repair broken or cracked glasses. This is available from most hardware stores and can be bought for about $10. Make sure your work area is properly prepared prior to mixing the epoxy. Also, ensure that you have all the equipment needed to complete the task.

If your lower or upper sash isn't lifting easily it's because the cords on the sash weights are damaged. Thankfully, this is an easy fix that can be made with the help of the ladder and a flathead screwdriver. Replacing a drip cap that has rot is a second repair that can be completed at home. Most home centers carry drip caps that are not rot free and can be easily caulked or nailed to be fixed. Check that the glass of double-paned or triple-paned window isn't damaged. The reason is that the gases in the space between the windows are responsible for enhancing the efficiency of the window and must not escape.

Water Leaks

If your uPVC window is leaking, it can ruin your interior and cause costly repairs. Water leaks may also cause structural damage to your home as well as mold growth. It is crucial to address any problems caused by leaking windows as soon as possible to limit damage.

The most common reason for window leaks is the damage to the sealant around the frame. Silicone caulking will restore the seal to its original state and prevent leakage. It's also important to look for gaps and cracks around the frame as well in the brick or stone walls surrounding your windows.

A blocked drainage hole or an issue with flashing are also common causes of leaking windows. It's important to check that the drainage holes are free and free of obstruction, particularly during heavy rainstorms. It's also a good idea to inspect the flashing on the top of your window and make sure it's properly sealed.

It's also important to make sure that your drip cap does not have any decay or is missing. A rotten drip cap or one that's missing allows water from above to seep into your window and cause structural damage. Replacing drip caps isn't difficult and usually a straightforward process of buying a new one and putting it in the correct position.

A professional can also test your windows for watertightness. They can use a tool to measure the water-tightness of your windows, and make sure they are in compliance with the standards of the industry. If your windows don't pass the test, you will have to replace them. This is a costly fix however it's worth it for the comfort and safety of your family.

Sagging

If your windows do not shut properly, it could result in a myriad of issues, such as condensation, drafts and an increase in your energy bills. It could be a sign that the windows were not properly fitted when they were installed or that the sealant has stopped working. There are several things you can try to resolve the problem.

To repair your window correctly, you need to create a space that is well-lit. Start by laying down newspaper or a blanket to protect the flooring from any splinters and drips that may fall from windows as you work.

You will also want to use a white cloth that has been immersed in a solution of detergent and water. This will ensure that you don't leave any color stains on your windows. Note the the hinge channel on your uPVC window when you are ready to start working. Then remove the channel from the frame and fill in the screw holes using epoxy (for uPVC windows) or wood filler (if your frames are made from wood). Be sure to smooth the filled hole before it sets.

After the holes have been filled, you can install the hinge channel. Make sure it is centered on the window jamb and make sure you drill the holes for the new screws about a quarter inch from the original locations.

Then, measure the length of the spindle that protrudes from the underside of the handle and order an alternative online or bring the old one to a hardware store for matching. Then, take the setscrew from the operator shaft. Smooth it down to allow the set screw to lock onto the shaft. Now your uPVC windows should be closing easily.

Broken Hinges

If your uPVC window hinges have broken or aren't functioning properly then you'll find it difficult to open or close the window. This can be a security problem and can also stop your home from being warm or cold. You can easily get a new hinge for your uPVC window. It's crucial to choose the right type for your windows.

This is because the hinges must be the same width to fit inside the window frame. The most common type of hinge used in windows made of uPVC is an 15mm or 18mm UPVC window hinge. However, there are specialised types of hinges for windows that can be used on different types of frames, like wooden frames. Getting the correct type of window hinge for your windows can assist you in avoiding the common problems that many homeowners have with their windows, like not closing properly.

The hinges of your window may be loose or stiff for a variety of reasons. The most common reason is that the hinges aren't properly securing. To check this, use a screwdriver to find the friction screw on the end of the hinge. Loosen it. Then, you are able to adjust it by turning it either way until you have the desired result.

Call Preston Glass Fix if your upvc window repair window's hinges don't work properly. We can offer a quick fix. Our technicians will inspect the condition of your hinges, and give you advice on the best solution. We can replace hinges on windows, retension them or install new lock mechanisms to ensure your UPVC windows are safe and secure.

Faulty locks

UPVC window locks and mechanism are an essential component of your home security, they make it extremely difficult to open the window repairs near me without breaking. It can be a hassle when a lock fails, but you don't have to replace the entire window.

Most of the time, it's a minor issue which could have been averted by regular maintenance. This is why we suggest getting your uPVC windows serviced regularly with our annual maintenance program to minimize the risk of having problems.

Modern uPVC windows come with espagnolette locks. These work by pushing the nose of the handle on the wedge block, then turning it to close the lock. They are very effective in keeping the window secure, but over time they can start to fail if not properly maintained. We recommend using WD-40 for lubrication at least once per year.

If you're noticing that your uPVC window isn't opening or closing as smoothly as it used to or if the lock doesn't function correctly, it could be an issue with the locking gearboxes within the frame. It can be difficult to access this as it requires the removing of the seals that surround the frame and the removal of the handle (be careful not to scratch the seals).

A locksmith who is skilled in UPVC repair will be able identify the problem quickly and replace the failed locking mechanism with a precise replacement. This quick and simple fix can save you hundreds of dollars by avoiding having to purchase new windows.